Product Overview:
After the camera starts normally, it receives infrared commands and executes them. Press the remote control button, and the remote control reception indicator light flashes. Release the button, and the indicator light stops flashing. You can use the infrared remote control to perform preset position setting, position taking, horizontal, pitch rotation, and other operations.
Usage:
1. Standby key
After long pressing for 3 seconds, the camera enters standby mode. After long pressing for 3 seconds again, the camera performs a self check and returns to the HOME position. If the 0 preset position is set, there is no operation within 12 seconds, and the pan tilt is turned to the 0 preset position.
2. Camera selection
Select the address number that needs to control the camera
3. Number keys
Set or call preset positions 0-9
4. * key, # key
5. Focus control button: Adjust focus
[Auto focus]: Enter auto focus mode
[Manual Focus]: Switch the camera focus mode to manual; You can adjust the focus by pressing [Focus+] or [Focus -]
6. Zoom control button
[Zoom]+: Narrowing the lens angle; [Zoom -]: Lens widening angle
7. Set and clear preset keys
Set preset position: Save a preset position, set preset+numeric keys (0-9) to set the corresponding numeric key's preset position
Cancel preset position: Clear a preset position, clear the preset position+number keys (0-9) to cancel the corresponding number key's preset position
8. Pan tilt control button
Up, down, left and right arrows: Control the pan tilt to rotate up, down, left and right
[HOME] key: Return the pan tilt to the middle position or enter the next level menu
9. Backlight compensation control button
Backlight on/off: Turns backlight on or off
10. Menu key: Enter/exit the OSD menu or return to the previous menu level.
11. Camera infrared remote control address setting
[*]+[#]+[F1]: Address 1
[*]+[#]+[F2]: Address 2
[*]+[#]+[F3]: Address 3
[*]+[#]+[F4]: Address 4
12. Combination key function
1) [#]+[#]+[#]: Cancel all preset positions
2) [*]+[#]+[6]: Restore factory default values
3) [*]+[#]+[9]: Switch between forward and reverse installation
4) [*]+[#]+Automatic: Enter aging mode
5) [*]+[#]+[3]: Set the menu to Chinese
6) [*]+[#]+[4]: Set the menu to English
7) [*]+[#]+Manual: Restore default IP, username, password
8) [#]+[#]+[0]: Switch video format 1080P60
9) [#]+[#]+[1]: Switch video format 1080P50
10) [#]+[#]+[2]: Switch video format 1080I60
11) [#]+[#]+[3]: Switch video format 1080I50
12) [#]+[#]+[4]: Switch video format 720P60
13) [#]+[#]+[5]: Switch video format 720P50
14) [#]+[#]+[6]: Switch video format 1080P30
15) [#]+[#]+[7]: Switch video format 1080P25
16) [#]+[#]+[8]: Switch video format 720P30
17) [#]+[#]+[9]: Switch video format 720P30